Previous
Next
New
NEO035.01Retractable type fall arrester
Jobs / Activities
Lightweight and compact fall arrester fitted with a self-retracting high density polyethylene webbing lanyard of 3,5m. Its design allows vertical use up to 140kg. The shock absorber is packaged in a polyester bag.
Certifications
- EN 360 : 2023
Harness side connector
Anchor side connector
technical specifications
- Vertical use up to 140 kg
- Total length 3,5 m
- High density polyethylene webbing, wide 25 mm
- Aluminum housing
- Energy absorber with a polyamide and polyester tearing strap of 31 mm breadth wrapped with a protective pouch
- Vertical minimum clearance : 1,60 m
- Factor 0 + 30 ° minimum clearance : 2,09 m
- Arrest force < 600 daN
- Swivel anchor hook on top fitted with M (NM20ALUB) or A (NM16NS)
- Automatic swivel connector with fall indicator in anodized aluminum K (NM26ELFA) or X (NM28NET)
- Weight : 2,07 kg
minimum clearance
- Vertical (Factor 0) ≥ 1,60m
- Vertical (Factor 0 + Max. offset 30°) ≥ 2,09m
Minimum values needed depending on configuration.
Read and understand the user instructions before use.
Check the available clearance and the compatibility of the complete system according to the actual conditions of use.
Données Techniques
Type of products
- Retractable type fall arrester
Activities
- Construction
Lanyard
- Webbing
Fall indicator
- Yes
Swivel
- Yes
Horizontal use - EDGE
- No
Documents
FT.NEO035.01.M Rev01
Technical data sheet
DC.NEO035.01_Rev01
UE Declaration of conformity
NEOFEU advantages
expert
French manufacturer since 1955
design
An integrated design office for innovation
quality
ISO 9001 Certified
TRACEABILITY
Each component is tracked and tested
