Previous
Next
NUSL4ECOFull body harness with integrated work positioning belt
Presentation
Harness with two fall arrest attachment points in the back, either on the steel D ring or on the extension strap, and one fall arrest attachment point in the front by connecting the 2 webbing loops. The extension strap when not used can be fixed onto shoulder strap through Velcro tape. A padded belt with 2 lateral D rings and four tool-holders is integrated to this harness.
Technical specifications
technical specifications
- Use up to 140 kg(1)
- Primary webbing in polyester 44 mm wide ( R > 27 kN )
- Simultaneaous shoulder and legs straps adjustment through zinc plated male-female quick buckles
- Back fall arrest attachment point on steel D ring or on 30 cm long extension strap
- Front fall arrest attachment point on web loops to connect together
- Padded belt with 2 lateral D rings and 4 tool-holders
- Secondary chest strap 25 mm wide
- Static resistance > 15 kN
- Universal size
- Masse : 1,3 kg
(1) Weight included user, his tools and material. As far as it is associated with fall arrest device tested to 140kg (see user manual)
Standards
Certifications
- EN 361
- EN 358
Documents
DC.NUSL4ECO.02
UE Declaration of conformity
FT_NUSL4ECO_IND06
Technical data sheet
DEX.HARECO.11
User manual
