Previous
Next
NEW
HAL'O®18Retractable type fall arrester for mobile elevating work platforms
- MEWP use
- 1,8m webbing
- Lightweight & compact
Equipped with an NFC chip
Anchor side connector
Presentation
Designed for work in mobile elevating work platforms (MEWPs), HAL’O®18 combines a lightweight, compact design with freedom of movement. Weighing just 1.16kg and offering a length of 1.8m, it is ideally suited to these applications.
Equipped with HMPE webbing and a tear-webbing energy absorber, it provides protection for users weighing up to 140kg. Tested over two sharp edges (EN 360:2023 Annex A), it is also suitable for vertical and horizontal use, as well as fall factor 2 applications.
Its swivel anchor ring allows the device to follow the user’s movements, while its automatic-locking aluminium connectors make attachment easier.
Technical specifications
- Vertical / horizontal and factor 2 use up to 140 kg
- Tested for use in mobile elevating work platforms
- Total length 1.8 m
- HMPE webbing width 25 mm
- High resistance synthetic housing with fiberglass
- Energy absorber with a polyamide and polyester tearing strap of 31 mm breadth wrapped with a protective pouch
- Corrosion treated components
- Fall indicator sewn onto the webbing
- Arrest force < 600 daN
- Swivel anchor hook on top fitted with P (NM17ALU) or A (NM16NS) connector
- Automatic swivel connector on lanyard with fall indicator, opening 28 mm, in anodized aluminum
- Weight: 1.16 kg (NEO017HPJ.01)
Minimum clearance
- Vertical (Factor 0) ≥ 1,6m
- Vertical (Factor 0 + Max. offset 30°) ≥ 1,85m
- Vertical (Factor 2 / MEWP) ≥ 3,6m
- Horizontal use (EDGE) ≥ 4,6m
Minimum values needed depending on configuration.
Read and understand the user instructions before use.
Check the available clearance and the compatibility of the complete system according to the actual conditions of use.
'O®18
Standards
Certifications
- EN 360 : 2023
Documents
DC.NEO017H_Rev01
EU Declaration of conformity
FT.NEO017H.01.GB_Rev01
Technical data sheet
DEX.ARA.18
User manual
Technologies
MEWP
Tested in accordance with the specific requirements of EN 360:2023 Annex A, HAL’O®18 is suitable for use in mobile elevating work platforms (MEWPs).
Track, Manage, Inspect
With its integrated NFC chip, HAL’O®18 works with Scannable to simplify equipment tracking, management and inspection through a mobile or web app.
Compact & Light
With its compact housing and weighing just 1.16 kg, HAL’O®18 keeps bulk to a minimum while offering excellent freedom of movement.
Swivel 360°
The swivel anchor ring allows the device to rotate freely, follows the user’s movements and reduces webbing twist for greater comfort during use.
Additional products
NEW
Ergonomic full body and rescue harness
- Magnetic bukle
- Ergonomic shape
- Scannable traçability
Previous
Next
Our
strengths
French manufacturer
Since 1955.
In-house design
An in-house design office to drive innovation.
Certified quality
ISO 9001 certification.
Testing and traceability
Each component is tested and traced.